Remove/install paneling on rear center section

AR68.30-P-4785LW

Remove/install paneling on rear center section

14.05.2019

Model

205.0/1/3/4

Model

213.0/1

Model

238

Shown on model 205.0

1

Rear center section paneling

4

Retaining clips

2

Trunk floor

5

Retaining tab

3

Mounting clip

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Lift trunk floor (2).

2

Remove retaining clips (3).

 Model 213.016/053/054/153
Four retaining clips (3) are installed.

 Dismantling tool

*000589956300

3

Remove rear-end center-section trim (1) from retaining clips (4).

 Long wedge

*115589035900

4

Remove rear-end center-section trim (1) upward.

 Installation: Insert rear center section paneling (1) into body with retaining tabs (5).

5

Install in the reverse order.