P68.30-2194-09
1 Upper B-pillar paneling
2 Trim panel of bottom of B-pillar
3 Edge guard
4 Clamps
8 Pin
9 Bracket
10 Pushbutton
5 Seat belt
6 Clamps
7 Locking pawl
P91.40-2518-04
11 Screw
12 Electrical connector
| Remove | ||
1 | Position seat forward | ||
2 | Remove covering on belt end fitting | ||
3 | Unscrew bolt (11) | ||
4.1 | Disconnect electrical connector (12) | On USA version code 494a | |
Only on passenger side. | |||
5 | Remove edge guard (3) in area of B-pillar paneling | ||
6 | Press clips (4) off of upper B-pillar paneling (1) with screwdriver | ||
7 | Remove upper B-pillar paneling (1) from bottom B-pillar paneling (2). | ||
8 | Pull seat belt (5) out of upper B-pillar paneling (1) | ||
9 | Unclip bottom B-pillar paneling (2) from clips (6) and remove | ||
| Install | ||
10 | Insert clips (4) into B-pillar | ||
11 | Clip bottom B-pillar paneling (2) into clips (6) | ||
12 | Insert seat belt (5) through top B-pillar paneling opening (1) | ||
13 | Install upper B-pillar paneling (1) into bottom B-pillar paneling (2) | ||
14 | Clip upper B-pillar paneling (1) into clips (4) | The bolt (8) must be inserted in the support (9) and the lock pawl (7) must be inserted in the button (10). | |
15 | Fit the belt end fitting onto the seat with bolt (11) and tighten | Screw at belt end fitting. | |
16.1 | Connect electrical connector (12) | On USA version code 494a | |
Passenger-side only | |||
17 | Install cover on belt end fitting | ||
18 | Install edge guard (3) on B-pillar | ||
19 | Check seat belt height adjustment at B-pillar for proper function | It must be possible to adjust and lock the seat belt height adjustment in five positions. |
Seat belts/emergency tensioning retractors