AR68.30-P-4700GCR | Remove/install paneling on B-pillar | 27.2.12 |
MODEL 461.331
with rotation ring in roof,
without protection kit
P91.40-2565-01
1 Seat belt guide bracket
P68.30-3065-06
2 Screw
3 Cover
4 Seat belt height adjustment fitting
5 B-pillar paneling
6 Screw
P91.40-2567-01
7 Seat belt end fitting
8 Screw
| Remove/Install | ||
1 | Unscrew bolt (8) from belt end fitting (7) | | |
Loctite 243 | |||
2 | Remove cover from seat belt guide bracket (1) upward | ||
3 | Unscrew nut from seat belt guide bracket (1) and remove seat belt from B-pillar | | |
Installation: Ensure that belt is not twisted | |||
Loctite 243 | |||
4 | Remove seat belt height adjustment fitting (4) | For this purpose, unscrew upper and lower bolt from seat belt height adjustment fitting (4) | |
5 | Unscrew bolts (2) | Loctite 243 | |
6 | Remove cover (3) | ||
7 | Unscrew bolt below cover (3) | | |
Loctite 243 | |||
8 | Unscrew bolts (6) | | |
Loctite 243 | |||
9 | Remove B-pillar paneling (5) | When removing B-pillar paneling (5) guide seat belt through opening (arrow) on B-pillar | |
Installation: Ensure that belt is not twisted | |||
10 | Install in the reverse order |
Trims and trim frames
Number | Designation | Model | |
BA68.30-P-1012-01B | Bolt, reinforcement to B-pillar | Nm | 15 |
BA68.30-P-1013-01B | Bolt, B-pillar reinforcement to vehicle floor | Nm | 15 |
Seat belts/emergency tensioning retractors
Number | Designation | Model 461 | |
BA91.40-P-1001-01C | Belt end fitting bolt | Nm | 35 |
BA91.40-P-1002-01C | Screw/nut on front seat belt guide bracket | Nm | 35 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |