P68.30-0440-09
Illustrated on model 168 up to 28.2.01
1 Paneling (B-pillar top section)
4 Assembly wedge
5 Edge guard
2 Paneling (B-pillar bottom section)
3 Clips
| Removing, installing | ||
1 | Remove belt end fitting and adjustable upper belt guide fitting from B-pillar | ||
2 | Remove edge guard (5) from B-pillar on both sides in area of paneling (1 and 2) | ||
3 | Carefully unclip paneling (1) out of clips (3) with assembly wedge (4) | Installation: Check clips (3), replace if necessary | |
4 | Remove paneling (1) | ||
5 | Carefully unclip paneling (2) out of clips (3) with assembly wedge (4) | | |
6 | Pull paneling (2) out of cover (arrows) at bottom and remove | ||
7 | Install in the reverse order |
Assembly wedge
110 589 03 59 00