Remove/install trim at C-pillar

AR68.30-P-4490GQ

Remove/install trim at C-pillar

22.8.14

MODEL

166 (except 166.8)

without CODE Z05 (B5 armoring on special protection version)

1a

Guide lugs

1

Cover

2

Headliner

3

Retaining clamp

4

Screw

5

Edge guard

 

Remove/install

1

Remove side paneling in trunk

AR68.30-P-4800GQ

2

Remove edge guard (5) on paneling (1) from C-pillar

3

Remove bolt (4) from belt end fitting at bottom

 Bolt, belt end fitting/seat belt lock, rear seat on body/seat

*BA91.40-P-1007-01R

4

Unclip paneling (1) on C-pillar from side wall

 Installation: Make sure that retaining clip (3) is seated properly.

 Mounting wedge

*110589035900

5

Remove paneling (1) on C-pillar from headliner (2) and remove paneling from D-pillar

 Installation: Install guide lugs (1a) in headliner (2) and in D-pillar paneling free of tension.

6

Remove paneling (1) from C-pillar

 Installation: Do not twist seat belt.

7

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

MODEL 166

BA91.40-P-1007-01R

Bolt, belt end fitting/seat belt lock, rear seat on body/seat

Nm

35