1 | Grab handle |
2 | Covers |
3 | Clips |
P68.30-4045-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on safety-relevant components | |||
| Remove | ||
1 | Remove covers (2) | ||
2 | Press clips (3) together and remove grab handle (1) | ||
3 | Release and disconnect electrical connector of rear interior lamp at rear grab handle (1) | If installed. | |
4 | Remove clips (3) from body | ||
| Install | ||
5 | Clip clips (3) and covers (2) into grab handle (1) | ||
6 | Connect electrical connector of rear interior lamp at rear grab handle (1) | If installed. | |
7 | Clip grab handle (1) into roof | ||
| Check | ||
8 | Check grab handle (1) on roof |