Remove, install inner paneling on rear-end door window · ar6830p1080pb · Mercedes-Benz WIS

AR68.30-P-1080PB

Remove, install inner paneling on rear-end door window

11.3.08

MODEL 203.7

P68.30-2278-01

Shown on model 203.7## #A

1 Ball head

2 Side paneling

3 Retaining clips

P68.30-2279-01

P68.30-2305-01

Shown on model 203.7## #A

2 Side paneling

4 Upper trim panel

5 Upper retaining clamps

P68.30-2306-01

 	Remove/install
1	Unclip upper paneling (4) and remove	 Unclip carefully, otherwise the retaining tab can break off on the inside of the upper paneling (4).
2	Unclip both restraint cables on trunk luggage cover from ball heads (1).
3	Unscrew ball heads (1)	On vehicles with ball heads (1) screwed on.
		 Ball heads (1) which are screwed on can be replaced later by ball heads (1) which clip into the side paneling (2) later. It is not necessary to remove clipped in ball heads (1).
4	Loosen side paneling (2) from retaining clamps (3) and remove
5	Install in the reverse order