AR68.20-W-2040A | Remove/install floor covering | 20.11.97 |
MODEL 375.1 with BODY 375.830
MODEL 375.3 with BODY 375.810
MODEL 375.4 with BODY 375.840
MODEL 944 with BODY 944.899
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899
MODEL 970, 972, 974, 975, 976 with BODY 972.899
W68.20-0001-09
Shown on body 940.899
1 Center tunnel floor covering
2 Screw
3 Entrance paneling
4 Floor covering on passenger side
9 Mirror adjustment plug
10 Driver's side floor covering
11 Seat fastening cutout
5 Grab handle
6 Screw
7 Housing
8 Screw
| Removal/installation | ||
1 | Remove front seats | ||
2 | Remove entrance paneling (3) | ||
3 | Remove support rod (5) from entrance | As of 10/99 the support rod is placed down into the wheelhouse paneling. | |
| |||
4 | Partially loosen wheelhouse paneling in front area | ||
5 | Remove footwell cover on right | On vehicles up to 09/99. | |
6 | Remove floor covering on passenger and driver's side (4, 11) | ||
7 | Remove housing (7) for parking brake lever | Disconnect mirror adjustment connector (9) | |
8 | Remove center tunnel (1) floor covering | ||
9 | Install in the reverse order |
Retaining rod
Number | Designation | Body 375.810 | Body | Body | |
BA68.70-N-1001-01A | Screw for retaining rod on cab | Nm | 18 | 18 | 18 |
Retaining rod