ประเภท ar · หัวข้อ 68.20 · เวอร์ชัน 0100 · 2018-05-04
ใช้กับ: Model 447 with code FG0 (Deluxe center console with roller shutter door) with code ZK7 (Equipment line MARCO POLO) except code FF1 (Centre console with stowage compartment) except code FF2 (Centre console with 1-DIN aperture)
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 3 Body › 68 Interior equipment › 68.20 Center console — ซีรีส์ 447
EinPAS 37 Interior equipment › 37.20 Center console › 37.20.30 Center console/armrest/trim/cover — ซีรีส์ 447
AR68.20-S-2000-06E
Make bores in center console
Model
447
with code FG0 (Deluxe center console with roller shutter door)
with code ZK7 (Equipment line MARCO POLO)
except code FF1 (Centre console with stowage compartment)
except code FF2 (Centre console with 1-DIN aperture)
S68.20-4579-79
View from below
1
Produce bores (1) with a diameter of Ø 3 mm as shown.
Dimension (a): 85 mm Dimension (b): 70 mm
S68.20-4578-79
View from front
2
Produce bore (2) with a diameter of Ø 25 mm precisely in center as shown.
Dimension (c): 30 mm
3
Produce cutouts (3) with a width of 7.5 mm and a height of 20 mm as shown.
Dimension (d): 40 mm Dimension (e): 20 mm Dimension (f): 84 mm
