Removing and installing front floor covering (on left)

AR68.20-P-2050F

Removing and installing front floor covering (on left)

3.3.95

 

Removal, installation

1

Cover below instrument panel removed (left)

AR68.10-P-1500F

2

Pull off cover (2) on longitudinal member upward (3 clips)

3

Pull edge guard (1) off in lower area of
A-pillar

4

Remove cover (3) and unscrew screw (4)

5

Remove paneling (5) toward rear; for this purpose unclip clips (6, 2 each) on A-pillar

6

Unscrew nuts (8, 2 each) on accelerator pedal (9) and remove accelerator pedal from threaded stud

7

Move driver's seat all the way down

8

Lift floor covering (10) at rear, pull out along center console and then remove floor covering toward rear

 Installation:
When installing insert floor covering (10) in area of center console (arrows)

9

Reinstall in opposite order