1 | Cover |
2 | Lower cover (of upper steering column trim) |
3 | Inner footwell cover |
4 | Outer footwell cover |
5 | Upper cover (of upper steering column trim) |
A47 | Switch module special equipment |
X100.16 | Diagnostic socket |
W68.10-1104-06
1 | Cover |
5 | Upper cover (of upper steering column trim) |
6 | Connection element |
W68.10-1106-11
| Remove/install | ||
1 | Switch off ignition | ||
2 | Position steering column to lowest position | ||
3 | Remove outer footwell cover (4) and inner footwell cover (3) on driver side | ||
4 | Remove upper cover (5) from lower cover (2) | ||
5 | Remove upper cover (5) from trim (1) | Upper cover (5) is connected with four retaining clips to fabric connecting part (6) of trim (1). | |
6 | Remove paneling (1) upward | Trim (1) is clipped under instrument panel. When removing paneling (1), disconnect connectors from special equipment switch module (A47) and diagnostic socket (X100.16). | |
7 | Remove diagnostic socket (X100.16) at trim (1) | Only when replacing paneling (1). | |
8 | Remove special equipment switch module (A47) from paneling (1) | Only when replacing paneling (1). | |
9 | Install in the reverse order |