S68.10-4566-08
Shown on model 447 |
1 | Cover | 2 | Retaining clamp | 3 | Catch hook |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Position long wedge between instrument panel and cover (1), release cover (1) and lift up so that electrical connections are accessible | Installation: Check retaining clips (2) and catch hooks (3) for damage. | |
Long wedge | |||
If retaining clips (2) are damaged | |||
| |||
Replace retaining clip (2) in question | |||
If catch hooks (3) are damaged | |||
| |||
Replace cover (1) | |||
2 | Disconnect all electrical connections from back of cover (1) and remove cover (1) | ||
3 | Remove upper control panel control unit | Only when replacing cover (1). | |
4 | Remove air conditioning control and operating unit | Only when replacing cover (1). | |
5 | Remove center air vents on both sides | Only when replacing cover (1). | |
6 | Install in the reverse order | ||
| Check | ||
7 | Check integrated electronic components for proper function |
115 589 03 59 00
Long wedge