S68.10-2000-09
Illustrated on model 638 except models 638.094/194/294
1 Screws
2 Knob
3 Nut
B34.1 Interior temperature sensor connection
SX Type of switch used
SX.1 Type of switch connector used
4 Center cover on instrument panel
5 Interior temperature sensor cover
B34 Interior temperature sensor
| Removal, installation | ||
| Notes on battery | All models | |
1 | Disconnect ground lead from battery | Installation - Code radio. See | |
Owner's manual. | |||
2 | Remove radio | Remove with mounting frame. | |
3.1 | Pull off knobs (2) | Except models 638.094/194/294 | |
Do not damage parts. | |||
4.1 | Unscrew nuts (3) | Except models 638.094/194/294 | |
5.1 | Remove selector lever cover | Only on model 638.2 without code G40 (automatic transmission) and | |
Separate cables straps Pull selector lever cover up and off | |||
6 | Unscrew screws (1) | ||
7 | Remove center cover on instrument panel (4) | Carefully unclip to prevent damaging retaining catches (danger of breaking) | |
8 | Disconnect connector (SX.1) from switch (SX) | Mark connectors (SX.1) to associated switches (SX) (arows). The switch designation (SX) and (SX.1) stand for all other switch and connection designations | |
9.1 | Disconnect temperature sensor connector (B34.1) | Only with code H06 (air conditioning) in model 638 except models 638.094/194/294. | |
It is not necessary to remove the interior temperature sensor cover (5). | |||
10 | Install in opposite order | Installation : In model 638 except models 638.094/194/294 pay attention to illuminated pin on heater/ventilation switch unit (danger of breaking) |