Shown on model 257.### 1# |
1 | Cover |
2 | Screw |
3 | Retaining clips |
4 | Electrical connector |
5 | Hook |
6 | Electrical connector |
E17/15 | Right front footwell lamp |
B10/36 | Right footwell air outlet temperature sensor |
P68.10-5586-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Adjust front passenger seat to the rear. | ||
2 | Remove front door sill. | ||
3 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
4 | Remove screw/bolt (2). | ||
5 | Unclip trim (1) from retaining clamps (3). | Long wedge | |
6 | Push trim (1) on bracket (5) to the outside, unhook, and lower (arrow) until electrical connectors (4, 6) are accessible. | ||
7 | Disconnect electrical connectors (4, 6). | ||
8 | Remove trim (1). | ||
9 | Remove right footwell vent air outlet temperature sensor (B10/36) or left footwell vent air outlet temperature sensor. | When replacing trim (1). | |
10 | Remove right front footwell lamp (E17/15) or left front footwell lamp. | When replacing trim (1). | |
11 | Install in the reverse order. |
115 589 03 59 00
Long wedge