P68.10-0256-06
1 Molding (driver's side)
2 Threaded studs
3 Clip
4 Threaded studs
5 Molding (passenger side)
6 Clip
7 Threaded studs with nuts
8 Sliding clip
9 Instrument panel
Arrow Removal and installation direction for molding (5)
P68.10-0291-06
1 Molding (driver's side)
3 Clip
5 Molding (passenger side)
6 Clip
8 Sliding clip
| Removal | ||
1 | Remove cover for loudspeaker | ||
2 | Pull threaded studs (2) on molding (1, driver's side) out of clips (3) in instrument panel (9) with plastic wedge | | |
3 | Put down molding (1) | ||
4 | Pull the three outer threaded studs (4) on the molding (5) out of the clips (6) in the instrument panel (9) with plastic wedge | | |
5 | Then pull molding (5) outwards and remove the two center threaded studs (7, with nuts) from the sliding clips (8) | ||
6 | Put down molding (5) | ||
| Installation | Replace defective clips (3, 6 and 8) on instrument panel | |
7 | Press threaded studs (2) on molding (1) into clips (3) in instrument panel | ||
8 | Insert threaded studs (7, with nuts) on molding (5) into the two sliding clips (8) and slide molding (5) toward center against stop | ||
9 | Press threaded studs (4) on molding (5) into clips (6) | ||
10 | Install cover for loudspeaker |
115 589 03 59 00
Long wedge