P68.10-2396-09
1 Cover on shift lever
2 Ashtray housing
3 Cover on center console
4 Center console
10 Instrument panel carrier
11 Instrument panel
13 Heater/air conditioner housing
A1 Instrument cluster
S1 Light switch module
5 Center air nozzle, top
6 Dashboard lower section on driver side
7 Steering wheel
8 Glove box to edge
9 Center reinforcement with air ducts
P68.10-2395-05
14 Screw
P68.10-2393-09
10 Instrument panel carrier
13 Heater/air conditioner housing
17 Bolts
18 Nut
21 Bolts
15 Jacket tube
16 Bolts
P68.10-2389-08
10 Instrument panel carrier
19 Screw
20 Nuts
13 Heater/air conditioner housing
Modification notes
| Remove/install | ||
| Notes on self-locking nuts and bolts | ||
1 | Move adjustable steering column all the way out and down | ||
2 | Remove glove box with edge (8) | ||
3 | Dashboard (11) removal | ||
4 | Remove center reinforcement with air ducts (9) | ||
5 | Remove wiper system | ||
6 | Remove bolts (14, 21) | ||
7 | Remove steering column tube (15) from instrument panel carrier (10) and fold down into footwell | Do not remove bottom steering shaft from steering coupling. | |
Model 203 except 203.081/084/087/092/281/ 284/287/292 Manually adjustable steering column tube | |||
Model 203.081/084/087/092/281/284/287/292 Manually adjustable steering column tube | |||
8 | Open cable duct on instrument panel carrier (10) | In area of steering column tube (15). | |
9 | Disconnect all cable ties and lines from instrument panel carrier (10) and expose lines | ||
10 | Remove bolts (16) | ||
11 | Remove bolts (17) | ||
12 | Unscrew nut (18) | ||
13 | Unscrew bolt (19) | ||
14 | Unscrew nuts (20) | ||
15 | Remove instrument panel carrier (10) | Carefully remove instrument panel carrier (10) to prevent damaging the interior compartment and the heater, air conditioning housing (13). | |
Installation: First position all bolts and nuts, then align instrument panel carrier (10) and tighten bolts and nuts. Otherwise the instrument panel carrier (10) can distort. | |||
16 | Install in the reverse order |