Remove/install bottom paneling for dashboard on driver side

AR68.10-D-1501TS

Remove/install bottom paneling for dashboard on driver side

18.04.2018

Model

907, 910

Shown on model 907

1

Lower trim panel

4

Cover

Shown on model 907

1

Lower trim panel

3

Electrical connectors

2

Bolts

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Unclip trim (4) (arrow A) and remove.

 Clip remover

*452589016300

2

Release lower center stowage compartment at instrument panel.

AR68.10-D-1513TS

3

Unscrew bolts (2).

4

Unclip lower trim (1) in upper area and remove until electrical connectors (3) are accessible.

 Clip remover

*452589016300

5

Disconnect electrical connectors (3) and remove lower trim (1).

 The number of electrical connectors (3) may vary depending on the vehicle equipment involved.

6

Install in the reverse order.



Check

7

Perform function test of all control elements installed in lower trim (1).