Apply adhesive material · ar6710p100008p · Mercedes-Benz WIS

AR67.10-P-1000-08P

Apply adhesive material

Model	117, 129, 140, 156, 168, 169, 170, 171, 172.4, 176, 190, 197, 202, 203, 204, 205, 207, 208, 209, 210, 212, 213, 215, 217, 218, 230.4, 231, 238, 242, 245.2, 246, 253, 292, 414.700
Model	211
	except code Z04 (Light armoring)
Model	220
	except code Z04 (Light armoring)
	except code Z07 (B7 armoring on special protection version)
Model	222
	except code Z07 (B7 armoring on special protection version)

000 589 86 63 00

Adapter

Repair materials

Number	Designation	Order number
BR00.45-Z-1015-02A	Glazing repair kit, 2-component adhesive	A 220 670 00 93
BR00.45-Z-1089-02A	Glazing repair kit, 1-component adhesive, replaced by: A 221 670 81 01	A 221 670 21 01
BR00.45-Z-1135-02A	Repair kit for installing windshields, 1-component adhesive	A 221 670 81 01

 The bonding area must be free of dust and grease.
Otherwise the adhesive force of the adhesive material starts to decrease.

 Model 117, 129, 140, 156, 168, 169, 170, 171, 172.4, 176, 190, 197, 202, 203, 204, 205, 207, 208, 209, 210, 212, 215, 217, 218, 230.4, 231, 242, 245.2, 246, 253, 292, 414.700
Model 211
except code Z04 (Light armoring)
Model 220
except code Z04 (Light armoring)
except code Z07 (B7 armoring on special protection version)
Model 222
except code Z07 (B7 armoring on special protection version)
It is necessary to use the components of the corresponding repair kit.

 Model 213, 238
Only use repair kit specified in EPC.

1.1

Model 117, 129, 140, 156, 168, 169, 170, 171, 172.4, 176, 190, 197, 202, 203, 204, 205, 207, 208 (except 208.3), 209, 210, 212, 213, 215, 217, 218, 230.4, 231, 238, 242, 245.2, 246, 253, 292, 414.700
Model 211
except code Z04 (Light armoring)
Model 220
except code Z04 (Light armoring)
except code Z07 (B7 armoring on special protection version)
Model 222
except code Z07 (B7 armoring on special protection version)
Guide application nozzle 13 mm (2) along body flange (4) and uniformly apply adhesive material (1).

 Install window (3) within 10 min after applying adhesive (1).
Otherwise the adhesive force of the adhesive material (1) starts to decrease.

 The height of the adhesive bead must be approx. 13 mm.

1.2	Model 208.3 Guide application nozzle 16 mm (6) along profile seal (5) on inside of window (3) and uniformly apply adhesive material (1).

 Install window (3) within 10 min after applying adhesive (1).
Otherwise the adhesive force of the adhesive material (1) starts to decrease.

 The height (b) of the adhesive bead must be approx. 16 mm.

2	Completely press out adhesive material (1) not required and dispose of.

 Use  adapter to completely press out 1-component adhesive. Insert between cartridge piston and plate on push rod of cartridge gun.

P67.00-2061-04