Cut out windshield with cutting blade

AR67.10-P-1000-01TS

Cut out windshield with cutting blade

Model

211

with code Z04 (Light armoring)

Model

212

with code Z04 (Light armoring)

1

Tape up surfaces zones on window cutout on front edge of roof and left and right A-pillars with adhesive tape (2).

2

Remove seal strip from windshield (1) at top to front edge of roof with suitable tool.

3

Cut adhesive bead and support bead at windshield (1) (area B).

 MODEL 211
Use window removal tool FSC 1.6.
Cutting blade, L-shape, cutting length 25.4 mm
Order no. 6 39 03 207 01 2, www.fein.com

 MODEL 212
Use window removal tool FSC 1.6.
Cutting blade, Z-shape, cutting length 60 mm
Order no. 6 39 03 081 01 3, www.fein.com

4

Cut adhesive bead on windshield (1) in relation to A-pillars and roof edge (area A).

 MODEL 211
Use window removal tool FSC 1.6.
Cutting blade, L-shape, cutting length 25.4 mm
Order no. 6 39 03 207 01 2, www.fein.com

 MODEL 212
Use window removal tool FSC 1.6.
Cutting blade, Z-shape, cutting length 60 mm
Order no. 6 39 03 081 01 3, www.fein.com

5

Place rag (4) between windshield (1) and engine hood.

6

Position cup suction tool (3) in upper third of windshield (1) and lift windshield (1) away from body flange.

 Helper required to guide windshield (1).
Otherwise the windshield (1) or the adjacent body parts can be damaged.

 Detach windshield (1) from body flange in upper area first, then pry out upward.