Cut out windows with window cut-out tool

AR67.00-D-0001-01TS

Cut out windows with window cut-out tool

Model

907, 910

Course of cutting wire and position illustration of suction cup winches

1

Cut cutting wire off of roll.

 The length of the cutting wire must be approx. 4 x the windshield diagonals.

2

Insert pipe probe from outside through adhesive bead.

3

Slide cutting wire from outside into pipe probe and remove pipe probe.

4

Moisten seal on window with soapy water.

Window with additional seal.

5

Slide cutting wire below window seal.

Window with additional seal.

6

Position cutting wire outside in gap between window and flange.

7

Punch pipe probe from inside through adhesive bead.

8

Slide remaining cutting wire from outside into pipe probe and remove pipe probe.

9

Secure windshield on body using a suitable tape.

 Secure windshield with tape so that it cannot slip.
Otherwise the paint and the body can be damaged when the window loosens abruptly.

10

Attach suction cup winches to inside of windshield and wind up cutting wire.

 Constantly monitor positioning of cutting wire on the inside and outside during the cutting out of the windshield.
Otherwise the components around and the window can be damaged.

11

Reposition suction cup winches according to the picture sequence once cutting point has reached the area of the respective circle marking (arrows).

12

Remove suction cup winches after the end position is reached and fasten on window outside.

13

Remove window from flange.

 Helper required.