Observe the superordinate service document and the safety information in the service document.
To perform the operation steps, the following commercially available tools are required: Rotary wire brush, wet/dry vacuum cleaner.
1 | Grind spot weld flanges in cross-hatched areas to bare metal on both sides. |
2 | Apply zinc dust paint to the insides of the spot weld flanges. |
W65.20-1028-04
3 | Grind mating surfaces down to bare metal (areas A, B). |
Grind spot weld flanges in cross-hatched areas to bare metal on both sides. |
4 | Apply zinc dust paint to the insides of the spot weld flanges. |
5 | Remove shavings and drill chips. |
W65.20-1029-04