Commercially available tools
Number | Designation | |
WH58.30-Z-1003-01A | Electrode miller | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1031-02A | C-clamp | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
W65.10-1056-01
1 Fit roof paneling front section and fasten with clamping pliers.
W65.10-1059-09
2 Roof paneling front section .
W65.10-1046-06
3 Roof paneling front section .
4 Roof paneling front section in areas A and B .
W65.10-1054-09
5 Roof paneling front section in areas C to H .
6 Drill 4 mm dia. holes in areas J and K and countersink with
8 mm dia. bit. on one side.
Alternately countersink from inside and outside.
7 Roof paneling front section in areas J and K .
Always weld from countersunk side.
8 Roof paneling front section in areas L and M .
9 Grind welds down flat in areas A to M.
W65.10-1053-04
10 Screw in screw for sun visor mount and align hole pattern.
11 Front roof paneling in areas N and O .
12 Grind welds down flat in
areas N and O.
13 Clean all welds with wire brush.