The superordinate service document as well as the safety information in the service document must be observed.
To perform the operation steps, the following commercially available tools are required: rotary wire brush, collet (standard), multifunction unit (spot welding), MIG-MAG inert gas welder (steel, solders, aluminum), wet/dry vacuum cleaner.
1 | Install center roof paneling, fit and fasten it. |
2 | Center roof paneling . |
W65.10-1036-06
W65.10-1035-09
3 | Center roof paneling . |
W65.10-1034-09
4 | Center roof paneling . |
5 | Center roof paneling (areas A, B, C, D). |
6 | Surface-grind weld joints (areas A, B, C, D). |
7 | Clean weld joints. |
8 | Remove shavings and drill chips. |