201 589 00 51 00
Spot weld miller
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
1 Mark separation line on right C-pillar paneling (1) inner section with the following dimension (dotted line, 2):
a = approx. 70 mm.
D63.20-0024-03
D63.20-0026-03
D63.20-0025-03
2 Cut spot welds out of inner section (1) up to marked separation line (dotted line, 2) (area A).
3 Separate inner section (1) along separation line (dotted line, 2).
D63.20-0037-02
4 Cut spot welds out of inner section (1) at bottom (areas C and D).
D63.20-0028-02
D63.20-0027-02
5 Cut rear spot welds out of rear wall (3) (area D).
6 Bend up rear wall (3) and cut spot welds out of console (4) (area E).
D63.20-0029-12
7 Cut front spot welds on right C-pillar inner section (1) out of console (4) and inner entry (areas F and G).
8 Grind off welds (6).