Preparing connection points for right side wall paneling bottom section · ar6310d591302b · Mercedes-Benz WIS

AR63.10-D-5913-02B

Preparing connection points for right side wall paneling bottom section

Commercially available tools

Number	Designation
WH58.30-Z-1001-40A	Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1002-02A	Spot welder
WE58.40-Z-1001-03A	Drill (electric/pneumatic)
WE58.40-Z-1003-03A	Angle grinder (electric/pneumatic)
WE58.40-Z-1004-03A	Body saw (electric/pneumatic)

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-07A	Zinc dust paint suitable for spot welding	A 000 986 34 42

D63.10-0031-06

1 Grind remaining sheet metal (8) back to edge of outer corner pillar paneling (5).

2 Grind remaining sheet metal (15) back to edge of front paneling (14).

D63.10-0032-11

 Perform the following step only when installing side wall paneling at points marked here with plugs welds (1) ( )

3 Punch 6 mm dia. holes in inner section of side wall paneling (10) and at a maximum hole interval of 95 mm (arrows).

D63.10-0029-11

4 Align character ridge (17), grind and coat with zinc dust paint.

5 Measure distance a between C-pillar (12) and end of character ridge (17).

D63.10-0030-10

6 Cut sheet metal strip (18) to size with the following dimensions:

b = a - 80 mm,

c = approx. 40 mm,

d = approx. 1.5 mm.

7 Grind off sheet metal strips (18) on both sides and coat with zinc dust paint.

D63.10-0033-11

8 Spot weld sheet metal strips (18) at character ridge (17)
(, arrows).