Shown on right side of vehicle |
1 | Mounting support for engine hood hinge |
2 | Wheel well |
3 | Headlamp support |
S62.20-5522-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Topical note | General information on body repair | ||
Topical note | Notes on paintwork repairs | ||
General information on MB materials | |||
| Remove | ||
1 | Remove all detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining in vehicle with fire-resistant welding protection blanket | Commercially available devices/tools | |
3 | Remove mounting support for engine hood (1) hinge | ||
4 | Remove wheel well (2) together with headlamp support (3) | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
5 | Preparing wheel well (2) for installation | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
6 | Install and weld in wheel well (2). | ||
Topical note | Measures for preventing damage to components when performing electric welding and soldering work | ||
| 000 588 01 84 00 Welder | ||
| 000 588 02 84 00 Welder | ||
Commercially available devices/tools | |||
Screw, longitudinal frame member to headlamp mount | |||
Zinc dust paint suitable for spot welding | |||
7 | Install headlamp mount (3) | ||
8 | Install mounting support for engine hood (1) hinge | ||
9 | Remove fire-resistant welding blankets | Commercially available devices/tools | |
10 | Install all detachable body components in area to be repaired |