AR62.10-D-5750C | Remove/install front end paneling | 12.3.10 |
MODEL 901.6, 902.6, 903.6, 904.6
MODEL 690.6
D62.10-1101-06
1 Cross-head screw
2 Front end paneling
3 Cross-head screw
4 Cross-head screw
5 Additional turn signal lamp
6 Expansion rivet
7 Bracket
8 Cross-head screw
9 Hexagon bolt
10 Internal Torx drive bolt
| Remove/install | ||
1 | Remove front bumper | ||
2 | Remove front grille | ||
3 | Remove lock crossmember | ||
4 | Remove lamp unit | ||
5 | Unclip additional turn signal lamp (5) (arrow). Disconnect connector and remove | ||
6 | Pull out expansion rivet (6) and remove bumper support bracket (7) | ||
7 | Remove sealant between area (A) of wheelhouse and front end paneling | Installation: Replace seal. | |
Sealant | |||
8 | Unscrew bolts (3) from A-pillar | ||
9 | Unscrew bolts (4) from wheelhouse | ||
10 | Unscrew bolts (8, 9, 10) | ||
11 | Remove front end paneling (2) | Remove sealant residues | |
12 | Install in the reverse order | Before installing inner front end paneling, coat with underbody protection agent Observe uniform gap to engine hood. |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1003-01A | Sealant, white, 310 ml, DB supply specification 6069.20 | A 001 989 63 20 |