Remove/install left underbody paneling

AR61.30-D-1001-02TS

Remove/install left underbody paneling

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Model

907, 910

Modification notes

12.07.2019

Method extended

Operation step 2

Shown on model 910 with engine 780.703

1

Remove screw/bolts (3).

2.1

Model 907
Model 910 with engine 651
Remove screw/bolts (2) .

2.2

Model 910 with engine 780.703
Remove expansion rivets (5).

 Installation: Check expansion rivet (5) for damage.

In the case of a corresponding finding,



Replace damaged expansion rivets (5).

3

Remove left underfloor paneling (1).

 To do so, remove nuts (4).

4

Install in the reverse order.

Shown on model 907