S61.10-A000-79
Shown with engine 780.701 |
1 | Cross strut | 2 | Screw | 3 | Bolts |
Shown with engine 780.702 |
1 | Cross strut |
2 | Screw |
3 | Bolts |
S61.10-A001-76
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | ||
| Remove/install | ||
1.1 | Raise vehicle. | Model 447 with engine 780.701 | |
1.2 | Remove engine compartment lining. | Model 447 with engine 780.702 | |
2 | Remove screw/bolts (2) . | Model 447 with engine 780.701Screw, cross strut to underbody | |
Model 447 with engine 780.702Screw, cross strut to body or to integral carrier | |||
3 | Remove cross strut (1). | To do this, remove screws/bolts (3). | |
Model 447 with engine 780.701Screw, cross strut to high-voltage battery module | |||
Model 447 with engine 780.702Screw, cross strut to body or to integral carrier | |||
Model 447 with engine 780.702Bolt, cross strut to battery frame | |||
4 | Install in the reverse order. |