201 589 00 51 00
Spot weld cutter
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D61.10-0008-06
1 Grind off weld seams (arrows).
2 Expose spot welds (arrows) and cut out.
3 Draw separation line (4) at a distance of a=55 mm, measured from the jack tube (5), on both sides and the underside of the side rail (3).
4 Detach side rail (3) along the separation line (4).
D61.10-0010-02
D61.10-0009-02
5 In area (6) of side rail (3), at a width of b=50 mm, uniformly provide 11 holes (arrow) with a of 10 mm.
6 In area (7), at a width of b=50 mm, uniformly provide 5 holes (arrow) with a of 10 mm.
7 In area (8), at a width of b=50 mm, uniformly provide 11 holes (arrow) with a of 10 mm.
8 Grind off areas (6, 7 and 8) on both sides and coat with zinc dust paint.