Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D61.10-0118-06
1 Mark separation line (4) at a distance of a = 30 mm measured from edge (arrow).
2 Cut section (2) off of connection element (1) along separation line (4).
3 Cut shaded area (5) off to width of b=10 mm.
D61.10-0115-06
4 Drill holes in areas (E and F) at uniform distance of 40 mm and 6 mm .
5 Drill two holes in area (G) at a uniform distance and 6 mm .
6 Grind connection element section (2) down to bare metal in marked areas and in area of holes and coat with zinc dust paint.