Remove/install suspension strut for front cab mounting

AR60.80-W-0040A

14.12.09

BODY 375.810 /840, 944.899, 940.899

BODY 942.899 except CODE (FL2) Air-sprung comfort cab suspension

W60.80-1039-06

Shown on body 942.899

1  Tensioning device

2 Suspension strut

Modification notes

26.6.06	Nut, suspension strut to front cab mounting	Body 374.870 in model 374.6, body 375.840/860 in model 375.4, body 944.890 in model 374.6, 940.1/2/3, 942.1/3, 943.1/3, 944.0/1/2, body 944.899 in model 944.0/2, body 958.880 in model 958.4	*BA60.80-N-1007-01B
	Nut, suspension strut to stabilizer	Body 374.870 in model 374.6, body 375.840/860 in model 375.4, body 944.890 in model 374.6, 940.1/2/3, 942.1/3, 943.1/3, 944.0/1/2, body 944.899 in model 944.0/2, body 958.880 in model 958.4	*BA60.80-N-1011-01B

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Open front flap
2	Remove air grille from front end	 Only on body 944.899, 375.810 and 940.899
 Danger!	Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension	Use only approved tensioning devices; shield off hazard area if necessary. Inspect special tools for damage and proper operation (visual inspection). Wear protective gloves.	AS00.00-Z-0001-01A
3	Install tensioning device (1) with clamping plates on suspension strut and remove suspension strut (2)	Pull suspension strut out of upper bearing and turn toward front.
			*BA60.80-N-1007-01B
			*BA60.80-N-1011-01B
			*210589003100
			*950589003200
4	Install in the reverse order

 Cab mounting

Number	Designation			Body 375.810 /820 in model 375.3	Body 375.840 /860 in model 375.4


BA60.80-N-1007-01B	Nut, suspension strut to front cab mounting	M141.5	Nm	163	163
BA60.80-N-1011-01B	Nut, suspension strut to stabilizer		Nm	163	163

 Cab mounting

Number	Designation			Body 940.890/899 in model 950.5/6, 952.5/6, 953.6, 954.5	Body 942.899 in model 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2


BA60.80-N-1007-01B	Nut, suspension strut to front cab mounting	M141.5	Nm	163	85
BA60.80-N-1011-01B	Nut, suspension strut to stabilizer		Nm	163	85

 Cab mounting

Number	Designation			Body 944.899 in Model 944


BA60.80-N-1007-01B	Nut, suspension strut to front cab mounting	M141.5	Nm	163
BA60.80-N-1011-01B	Nut, suspension strut to stabilizer		Nm	163

950 589 00 32 00

Tensioning plates

Tensioning device

210 589 00 31 00