G60.80-3273-09
1 | Cab | 3 | Safety rope | 5 | Lifting eye for cab | ||
2 | Lifting eye for frame | 4 | Shackle | 6 | Safety strut |
Danger ! | Risk of death caused by improper lifting of cab. Risk of injury caused by body parts being trapped and crushed when lowering cab | Only use approved lifting cradles. Ensure that the mounts are securely seated. Stay out from underneath a hanging cab. | |
Danger ! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
| Notes on tilting the cab | ||
Tilt, lower | |||
1 | Remove loose objects from cab | | |
2.1 | Open engine hood and raise to vertical position | Except code S84 (Right front additional mirror (on mowing door)) | |
2.2 | Remove engine hood | With code S84 (Right front additional mirror (on mowing door)) | |
3 | Unlock cab (1) | See owner's manual. | |
4 | Install suitable lifting cable between cab suspension eye (5) and lifting crane | | |
5 | Lift cab (1) with lifting crane until frame suspension eye (2) is accessible | ||
6 | Install safety rope (3) with two shackles (4) | ||
| Safety rope for tilting cab using a crane | ||
| |||
7 | Carefully lift cab (1) until safety strut (6) can be inserted between cab (1) and mounting console for step | ||
| Safety strut for supporting the tilted cab | ||
| |||
Ensure that the safety rope (3) is not tensioned completely. | |||
8 | Carefully lower cab (1) until safety strut (6) is seated tightly | ||
9 | Lower in reverse sequence |