Remove/install detachable parts for replacing front roof paneling

AR60.00-D-0053TS

Remove/install detachable parts for replacing front roof paneling

15.01.2020

Model

907, 910

Shown on model 907.7 with code D03 (roof and rear-end doors, high version)

Shown on left side of vehicle

2

Frame seal

3

Electrical wiring harness

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 910 with engine 780.703

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

Model 910 with engine 780.703

AH00.00-Z-0300-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove sealing frames (2) in the repair area and position outside of the working area.

2

Remove windshield.

Model 907, 910
except code F49 (Windscreen, heated)

AR67.10-D-1700TS

Model 907, 910
with code F49 (Windscreen, heated)

AR67.10-D-1700TSB

3

Remove front roof lining.

AR68.30-D-7607TS

4

Remove roof antenna together with antenna base.

AR82.62-D-1220TS

5

Remove front partition.

Model 907.6, 910.6 with code D50 (full-width partition wall) or with code D51 (full-width partition wall with 1 window) or with code D64 (partition with sliding door)

Model 907.6
with code D50 (Full-length partition)
Model 907.6
with code D51 (Entire partition with 1 window)

AR68.74-D-0700TSR

Model 910.6
with code D50 (Full-length partition)
Model 910.6
with code D51 (Entire partition with 1 window)

AR68.74-D-0700TSF

 Model 907.6, 910.6
with code D64 (Partition with sliding door)
No reference document exists for these vehicles.

6

Remove window airbags.

Model 907, 910
with code SH9 (Windowbag for driver and co-driver)

AR91.60-D-0693TS

7

Remove electrical wiring harness (3) in repair area and position outside the working area.

8

Install in the reverse order.