Glue in holder for Lane Assistant

AR54.71-W-0001E

Glue in holder for Lane Assistant

11.03.2013

MODEL

940, 942, 943, 944, 950.5/6

with CODE ET7 (Lane Assistant)

as of diagnosis version 7

1

Holder (for Lane Assistant)

2

Installation device

3

Protective foils

1

Holder (for Lane Assistant)

2

Installation device

4

Locating pin

5

Additional element

1

Remove rubber mat from the storage area in the center of the dashboard

2

Place holder (1) on installation device (2)

 Installation device

*930589016300

3

Clean windshield in area where holder (1) is to be bonded

4

Place additional element (5) on holder surface and fix in place using locating pin (4)

 A hole into which the locating pin (4) is inserted is in the holder surface.

5

Peel protective foil (3) off holder (1)

6

Place installation device (2) with holder (1) on additional element (5)

7

Push installation device (2) with holder (1) toward windshield until bonding surfaces of holder (1) lie against windshield

8

Press holder (1) onto windshield

 The bonding surfaces of the holder (1) must lie against the windshield free of bubbles.

9

Detach installation device (2) and additional element (5)

10

Insert rubber mat in the storage area in the center of the dashboard