Remove/install COLLISION PREVENTION ASSIST control unit

AR54.70-D-0002M

Remove/install COLLISION PREVENTION ASSIST control unit

28.01.2019

Model

906

with code JA6 (Active Brake Assist System)

with code XM0 (Facelift)

Model

906

with code JA6 (Active Brake Assist System)

with code XM5 (Facelift Latin America)

1

Front bumper

3

Electrical connector

2

Cross member

B162

COLLISION PREVENTION ASSIST control unit

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Unfasten front bumper (1) on right side of vehicle and secure on front module using a cable tie

AR88.20-D-2000M

 Remove front bumper (1) from right fender liner and cross member (2) until the electrical connector (3) is accessible.
Helper required.

2

Disconnect electrical connection (3)

3

Take off COLLISION PREVENTION ASSIST control unit (B162) from bumper at front (1) and remove

 First lift COLLISION PREVENTION ASSIST control unit (B162) using  assembly wedge (arrow a), and then guide it out of bumper at front (1) (arrow b).

 Mounting wedge

*110589035900

4

Install in the reverse order