Remove/install front PARKTRONIC sensor

AR54.65-S-0026P

Remove/install front PARKTRONIC sensor

16.06.2020

Model

470, 471

with code EZ8 (PARKTRONIC Park Assist)

Shown on right outer PARKTRONIC sensor (1) on model 470

1

PARKTRONIC sensor

3

Bracket

4

Seal

2

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1.1

Remove front bumper

When removing an inner PARKTRONIC sensor (1).

AR88.20-S-2000P

1.2

Release front fender liner in front area until the outer PARKTRONIC sensor (1) is accessible

When removing an outer PARKTRONIC sensor (1).

AR88.10-S-1301P

2

Unscrew bolt from bumper antenna and swivel bumper antenna out of working area

When removing left outer PARKTRONIC sensor (1).

AR82.62-S-8106P

3

Disconnect electrical connection (2)

4

Release catch hook in direction of arrow and pull PARKTRONIC sensor (1) rearwards out of the holder (3)

5

Check seal (4) for signs of damage and correct seating

If seal (4) is damaged.



Install new seal (4).

If the seal (4) is not correctly seated on the PARKTRONIC sensor (1).



Correctly position seal (4).

6

Install in the reverse order



Check

7

Perform function check for PARKTRONIC