S54.65-4702-07
1 | Electrical connector | 3 | Front camera | 4 | Bracket | ||
2 | Screw |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Read out and temporarily store basic data of 360° Camera control unit | When replacing front camera (3). | |
| |||
Installation: Transfer buffered basic data and perform initial startup of front camera (3). | |||
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
3 | Remove front bumper | ||
4 | Unclip electrical connector (1) from holder and disconnect | ||
5 | Unscrew bolts (2) and remove front camera (3) with holder (4) from front bumper | ||
6 | Unclip front camera (3) from holder (4) (arrows) and remove holder (4) | When replacing front camera (3). | |
7 | Install in the reverse order | ||
8 | Calibrate front camera (3) | ||
| |||
| Check | ||
9 | Check 360° camera for proper function |