Remove/install speed sensor on transmission

ประเภท ar · หัวข้อ 54.61 · เวอร์ชัน 0103 · 2016-12-31

ใช้กับ: Model 906 with transmission 711.680/685 with code J19 (Tachograph 1 day/2 drivers automatic (CM)) Model 906 with transmission 711.680/685 with code JD1 (Digital tachograph) Model 906 with transmission 711.680/685 with code JD2 (Tachograph digital EC with rpm + aux-recorder) Model 906.133/135/153/155/631/633/635/655/657 with transmission 710.510 with code J05 (Tachograph, Latin America) with code ZL3 (National version for Latin America)

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 54 Electrical system, equipment and instruments › 54.61 Speed recorder, trip recorder, taximeter — ซีรีส์ 906

EinPAS 31 Communication/information/entertainment › 31.35 Tachograph/toll system › 31.35.12 Sensor/switch/wiring harness — ซีรีส์ 906

ใช้กับเครื่องยนต์/เกียร์ด้วย: 710 510, 711 680, 711 685

AR54.61-D-5500-01B

Remove/install speed sensor on transmission

Model	906 with transmission 711.680/685
	with code J19 (Tachograph 1 day/2 drivers automatic (CM))
Model	906 with transmission 711.680/685
	with code JD1 (Digital tachograph)
Model	906 with transmission 711.680/685
	with code JD2 (Tachograph digital EC with rpm + aux-recorder)
Model	906.133/135/153/155/631/633/635/655/657 with transmission 710.510
	with code J05 (Tachograph, Latin America)
	with code ZL3 (National version for Latin America)

Remove

1	Remove travel and speed sensor (B6 or B6/12) and connect at side to substructure.

D54.61-1159-11

Install

2	Check O-ring and replace if necessary.

3	Install travel and speed sensor (B6 or B6/12).

4	Attach tamper-proof seal to travel and speed sensor (B6 or B6/12).