Pulse generator
Number | Designation | Model | Model | |
BA54.00-N-1003-01A | Bolt, vehicle speed sensor to transmission housing | Nm | 10 | 10 |
Pulse generator
Number | Designation | Model | Model | Model | |
BA54.00-N-1003-01A | Bolt, vehicle speed sensor to transmission housing | Nm | 10 | 10 | 10 |
D54.61-1160-01
Shown on transmission 722.6
1 Remove bolt (1), detach speed sensor (B6 or B6/12) with connected lines and place to one side.
For vehicles with code (J19) Tachograph 1 day / 2 driver automatic (EU)
or with code (JD1) EU digital tachograph
or with code (JD2) EU digital tachograph with rpm and additional recorder, the speed sensor (B6/12) is installed.
For vehicles without code (BB3) Electronic Stability Program, the speed sensor (B6) is installed.
Installation: Install new sealing ring.
Observe tightening torque for bolt (1).
For vehicles with code (J19) Tachograph 1 day / 2 driver automatic (EU)
or with code (JD1) EU digital tachograph
or with code (JD2) EU digital tachograph with rpm and additional recorder, replace the lead seal on the bolt (1).
2 Install in the reverse order.