Check fuel tank characteristic in instrument cluster (INS) and set parameters if necessary

AR54.30-W-7001A

Check fuel tank characteristic in instrument cluster (INS) and set parameters if necessary

4.11.05

Checking

1

Connect STAR DIAGNOSIS

*WH58.30-Z-1049-13A

2

Select "INS Instrument Cluster"

3

Select "Control unit adaptations"

4

Select "Parameterization"

5

Select "Other parameterizations"

6

Select "Fuel tank version (for fuel tank characteristic)"

 This window shows the current parameterized fuel tank.

Display in open window:

model 944, 950-954, 957

 Other fuel tanks.
All parameters for fuel tank authorized for this model, except for the 210 liter plastic fuel tank.

 210 l plastic fuel tank.
Parameter for the 210 l plastic fuel tank

 Individual characteristic
Parameter for selected characteristic.

Model 970-976

 All fuel tanks authorized for this model.

 Individual characteristic
Parameter for selected characteristic.

 If there is a different fuel tank installed on the vehicle than the current parameterized one, the fuel tank characteristic for the installed fuel tank must be parameterized.

Setting parameters

7.1

Set parameters for tank characteristic for fuel tank with an MB part no.

 Select the corresponding display in the open window (from step 6).

The tank characteristic for the selected fuel tank will be automatically parameterized in the INS.

7.2

Set parameters for tank characteristic for fuel tank with a non-MB part no.

To do this:

- Select "Individual characteristic" menu item in the open window (from operation step 6).

- In the window now open, enter the resistance values of the fuel level sensor for the 6 different fill levels (FULL, 3/4, 1/2, 1/4, RESERVE and EMPTY) for the fuel tank.

 The resistance values of the 6 different levels for the fuel level sensor of non-MB fuel tanks must be acquired from the manufacturer.

Number

Designation

WH58.30-Z-1049-13A

STAR DIAGNOSIS Compact diagnostic system for commercial vehicles

651 131 10 00