S54.30-4524-09
Shown on model 639 with code MA0 (E-CELL 60 kW) |
1 | Extraction hook | A1 | Instrument cluster |
2 | Instrument panel |
3 | Electrical connector |
A1 | Instrument cluster |
S54.30-4525-11
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Buffer codings of instrument cluster (A1) in Star Diagnosis | When replacing the instrument cluster (A1). | |
| |||
Installation: Copy buffered codings to new instrument cluster (A1). | |||
2 | Move steering wheel all the way down | ||
3 | Switch off ignition | ||
4 | Insert extraction hook (1) into openings on instrument cluster (A1) | Extraction hook | |
5 | Turn extraction hook (1) through 90° in direction of arrow | Extraction hook | |
6 | Pull instrument cluster (A1) out of instrument panel (2) using extraction hooks (1) | Pull out instrument cluster (A1) far enough only to gain access to electrical connector (3). | |
Extraction hook | |||
7 | Detach electrical connector (3) and remove instrument cluster (A1) | ||
8 | Install in the reverse order |
140 589 02 33 00
Extraction hook