S54.30-4530-09
1 | Radiator grille | 5 | Electrical connector | 9 | Bracket | ||
2 | Electrical line | 6 | Bracket | 10 | Bolt | ||
3 | Impact absorber | 7 | Bolt | B84 | Front 360° camera | ||
4 | Bumper | 8 | Blind |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove radiator trim (1) far enough to enable access to electrical line (2) | ||
2 | Pull impact absorber (3) forward | ||
3 | Expose electrical line (2) up to electrical connection (5) | ||
4 | Disconnect electrical connection (5) | ||
5 | Remove radiator grille (1) | ||
6 | Remove bolts (7) | ||
7 | Remove bracket (6) with front 360° camera (B84) | ||
8 | Unclip front 360° camera (B84) from bracket (6) | When replacing front 360° camera (B84). | |
9 | Unclip cover (8) from bracket (9) | When removing cover (8) or bracket (9). | |
10 | Remove screws (10) | When replacing bracket (9). | |
11 | Remove bracket (9) | When replacing bracket (9). | |
12 | Install in the reverse order | ||
13 | Calibrate front 360° camera (B84) with diagnostic system | ||
|