S54.25-1001-09
1 Cover
2 Paneling
3 Bolt
4 Bolt
5 Nut
A12 Electrical center (without steering column switch)
A12.1 Electrical center (steering column switch connector)
A12.2 Electrical center (main power switch connector)
A12.3 Electrical center (frame wiring harness connector)
A12.4 Electrical center (frame wiring harness connector)
A12.5 Electrical center (frame wiring harness connector)
A12.6 Connector
| Removing, installing | ||
1 | Disconnect ground cable of battery | ||
2 | Detach cover (1) | ||
3 | Unscrew bolts (3) | ||
4 | Detach paneling (2) | ||
5 | Remove contact spiral | Only with code SA5 (driver airbag) | |
Do not unscrew the bolts all the way. The bolts also act as an anti-rotation device. The contact spiral must never be opened under any circumstances. | |||
6 | Loosen electrical center (A12) by unscrewing bolt (4) and nut (5) | Installation: Do not tilt the electrical center (A12) when tightening. | |
| |||
| |||
7 | Unplug electrical connectors from electrical center (A12) | ||
8 | Remove electrical center (A12) | ||
9 | Install in the reverse order |
Switches