P54.25-2025-06
1 Bolts
2 Cover
3 Clamps
4 Clutch
5 Control cable for release lever on parking brake
N7-1 Light module
| Remove, Install | ||
1 | Connect quiescent current retention device | ||
2 | Disconnect ground cable of battery | ||
3 | Pull out release lever for parking brake | ||
4 | Unscrew bolts (1) | ||
5 | Remove cover (2) with light module (N7-1) from instrument panel | Pull parking brake release lever until cover folds out of instrument panel in direction of arrow. Observe clips (3). | |
6 | Release connector (4) and disconnect | ||
7 | Unhook control cable (5) from release lever on parking brake. | ||
8 | Install in the reverse order | ||
9 | Perform function check |