Remove/install steering column module

AR54.25-P-2802I

5.12.08

MODEL 215, 220, 230

P54.25-2028-11

1 Steering column switch module

A45 Fanfare horns and airbag clock spring contact

N80 Steering column module

P54.25-2059-06

Shown on steering column switch module without voice control system

2 Cover

3 Stud bolt

4 Bolts

N80 Steering column module

S4 Combination switch

S40/4 Cruise control switch with variable speed limiter (model 215, 220, )

S40/4 Cruise control switch (TPM) (model 230)

S59/1 Steering column adjustment and easy entry and exit switch group (model 215, 220)

S59/1 Steering column adjustment switch/

Steering wheel heater (model 230)

Modification notes

25.11.08

Perform initialization of DTR control unit after replacing steering column tube module, added

Step 8

 	Remove/install
1.1	Remove spiral contact coil (A45)	Model 215, 220 without code (472) Electronic Stability Program (ESP)	AR46.10-P-0200I
1.2	Remove steering angle sensor	Model 230 Model 215, 220 with code (472) Electronic Stability Program (ESP)	AR46.10-P-0300I
2	Loosen internal Torx bolt (arrow) and remove steering column switch module (1)	 Internal Torx bolt (arrow) is secured to prevent it falling out.
3	Remove cover (2) and remove push button (S40/4) upwards out of steering column tube switch module (1)	 On model 215 with code (813) Voice control system the voice control system switch and the push button (S40/4) form a common module and cannot be removed individually.
		 Installation: Ensure that the studs (3) are seated cleanly in the holes, by paying attention to the guides on the push button (S40).
4	Remove switch group or switch (S59/1) upwards out of the steering column tube switch module (1)	 Installation: Ensure that the studs (3) are seated cleanly in the holes, by paying attention to the guides on the switch group or switch (S59/1).
5	Remove bolts (4) and remove combination switch (S4) upwards out of steering column switch module (1)
6	Remove steering column module (N80) upwards out of steering column switch module (1)
7	Install in the reverse order
8	Perform initialization of DTR control unit with STAR DIAGNOSIS	After replacing steering column tube module (N80) on vehicles with code (219) Distronic (DTR)