AR54.25-D-1382B | Removing and installing electrical center | 10.4.96 |
MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4
D54.25-0001-06
41 Cover
42 Phillips screws
43 Hexagon nut
44 Steering column trim
45 Hexagon bolt
46 Electrical center
52 Hexagon nut
A Cover (41) locked
B Cover (41) unlocked
| Removing, installing | ||
1 | Disconnect battery | ||
2 | Unlock slotted screw by turning through 90° from position A to B and remove cover (41) | ||
3 | Unscrew Phillips screws (42) and hexagon nut (43) and remove steering column trim (44) | Installation: Make sure that the connector between the steering column switch and the electrical center (46) is not tilted when tightening the hexagon bolt (45), and that it makes full contact at the corners. | |
4 | Unscrew hexagon nut (52) and slacken hexagon bolt (45) | ||
5 | Pull electrical center (46) out of steering column switch connector | ||
6 | Install in the reverse order |