AR54.25-D-0001A | Remove/install fuel filler flap solenoid switch | 16.2.12 |
MODELS 902.061 /062, 903.061 /062 /063, 904.062 /063, 902.012 /072, 903.012 /013 /022 /072 /073, 904.012 /013 with ENGINE 111.979 with CODE (MS7) NGT (Natural Gas Transporter) sprinter
MODELS 902.661 /662, 903.661 /662 /663, 904.662 /663, 902.612 /672, 903.612 /613 /622 /672 /673, 904.612 /613 with ENGINE 111.984 with CODE (MS7) NGT (Natural Gas Transporter) sprinter
D54.25-0003-09
Illustration shows Sprinter prior to 2/2000
Components by analogy for Sprinter as of 2/2000
1 Fixture of solenoid switch
2 Cross-head screw
3 Solenoid switch
7 Fuel filler flap
8 Cap
4 Cap
5 Permanent magnet
6 Fixture of permanent magnet
| Remove/Install | ||
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
1 | Disconnect ground lead from battery | ||
| Notes on battery | All models | |
2 | Open fuel filler flap (7) | ||
3 | Lever off caps (4, 8) | ||
4 | Take solenoid switch (3) and permanent magnet (5) out of the fixtures (1, 6) | ||
5 | Pry paneling off the left front B-pillar | ||
6 | Separate plug connection of solenoid switch (3) and pull cable out of the hole to the outside together with grommet | ||
7 | Install in the reverse order |