Change crimping set and positioner at the crimper

AR54.18-G-0010-02DD

Change crimping set and positioner at the crimper

Model

000.001

1

  Close crimper (2) and remove screws/bolts (1) completely.

2

  Press crimper (2) all the way until it opens automatically and remove the   crimping dies (3, 4).

3

Insert corresponding   crimping dies (3, 4) into the open   crimper (2).

 The marks (arrows) on the   crimping dies (3, 4) must align with the marks (arrows) on the   crimper (2).

4

 Close  crimper (2) and tighten   crimping dies (3, 4).

5

Pull off   positioner (5) from bracket (6) and change.

 The magnet (7) of   positioner (5) must point downward.