S54.10-4692-09
1 | Prefuse box | 4 | Nut | 7 | Electrical connectors | ||
2 | Positive terminal cover | 5 | Threaded pins | G1 | On-board electrical system battery | ||
3 | Nuts | 6 | Positive line |
Danger | Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on battery | ||
| Remove/install | ||
1 | Disconnect the ground line for the on-board electrical system battery(G1). | ||
2 | Unclip positive pole cover (2) from prefuse box (1) through openings (arrows). | ||
3 | Unscrew nuts (3). | Nut, electric line to prefuse box | |
4 | Unscrew nut (4). | Nut, prefuse box to battery positive terminal | |
5 | Lift prefuse box (1) over threaded pin (5) and remove positive lines (6) from prefuse box (1). | ||
6 | Disconnect electrical connectors (7) and remove prefuse box (1). | ||
7 | Install in the reverse order |